Do EV chargers need bollards?
EV chargers do not always need bollards by rule, but they are often recommended wherever vehicles park or manoeuvre close to the unit. A bumper strike can damage the charger, cable or electrical feed. Bollards protect the investment, and some owners, insurers or installers require them.
Fully licensed and insured
Mon to Fri: 8:00am to 6:00pm · Saturday: 9:00am to 2:00pm · Sunday: Closed
Why protection is common
A charger stands at the front of a parking space, where vehicles pull in and reverse out. A moment of inattention or a slippery winter lot is enough to hit it. Repairs can mean replacing the unit, rewiring and an outage for users. A set of bollards costs less than that, which is why many commercial and multi-unit sites include them.
Where bollards are most useful
Wall-mounted units in a garage may be protected by a wheel stop or a guard rail instead.
- Pedestal chargers at the end of a parking stall
- Chargers in busy lots, parkades and loading areas
- Sites with snow clearing equipment working nearby
- Public or shared locations where drivers are unfamiliar with the layout
- Chargers close to a travel lane or ramp
What the requirements depend on
Whether bollards are required depends on the property owner, the insurer, the charger installer and any local requirements. We do not claim a universal rule. If you are planning charging, ask your electrician and your insurer what they expect, and check the site plan with the municipality if you are submitting drawings.
Layout also matters. Posts should leave room for car doors and for access to the charger, and should not block accessible parking space routes.
How a charger bollard project runs
- Review the layoutWhere the chargers go and how vehicles approach.
- Choose the postsHeight, finish and style that suits the site.
- Coordinate with electricalPosts must not interfere with conduit or feeds.
- InstallPosts are set to the planned positions.
- Check clearancesDoors, cables and accessibility are confirmed.
Where to start
See our EV charger bollards page for options, and our bollards page for the full range. Send a photo of the layout and we will suggest a plan.
Related questions
Can you match existing site finishes?
Yes. Finishes can be chosen to suit the building and signage.
Will bollards block cables?
We plan placement so cables reach the vehicle without being stretched or crossing walkways.
Do you install chargers?
We install the protection. The charger and electrical feed are done by an electrician.
Request a quote
Tell us what you need and we will get back to you. In a hurry? Calling is fastest.
Need bollards for your site?
Send us a photo or plan for a free quote. We make and install steel bollards across Ontario.
Call now (416) 483-2866